Is intended for use on post formed horizontal and vertical interior applications where forming is desired for functional or a decorative purpose, by rolling the laminate on a simple radius over the edge of the substrate eliminating seams on an attractive surface.

This Horizontal Grade can be post formed on outside radius to 1/2 " (12.7 mm) and cove radius to 3/16 " (4.76 mm). Post formable to permit bending on suitable commercial post forming equipment. Use whenever forming is desired for decorative or functional purposes in interior applications. Optimum post forming temperature is 325º F (163ºC). Frequent applications for counters, desktops, drawer panels and cabinet doors.

Color and Pattern Availability::
Available in the full range of LAMITECH solids, woodgrains and patterns. Please request actual samples for specification purposes.

Lamitech Grades:
50

Nominal Thickness:
0.039 ” (1.0 mm)

Sizes:
4X8 ' (1.22 X 2.44 m)
4X10 ' (1.22 X 3.06 m)
5X8 ' (1.53 X 2.44 m)
5X12 ' (1.53 X 3.66 m)
See Table # 01

Finishes:
See Table # 01

Technical Data:
Please request a Lamitech GRADE 70 -HGP- HORIZONTAL GRADE POSTFORMING Technical Data Sheet.